Upcoming Events

Filters
Age Group

Start It! Equipment Training

2:00pm - 3:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Teen Innovation and Creation

3:00pm - 4:00pm
Teen
Main Library
Library Branch: Main Library
Room: MN-Multipurpose Room
Age Group: Teen
Program Description: STEAM
Event Details:

Join us after school for our monthly crafting and innovating teen program! Come have fun, be creative, and express yourself with a blend of fun and creativity as we rotate through various crafting and STEM projects. 

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Sewing Open Lab

6:00pm - 7:30pm
Teen, Adult
LPCPL Exchange
Library Branch: LPCPL Exchange
Room: EX-Classroom
Age Group: Teen, Adult
Program Description: Maker
Event Details:

Let's sew! Gather on the second Tuesdays of the month for an evening of sewing, friends, and skill sharing. Bring a project that you're currently working on or start a new one with us!

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Scary, Scary Cemetery? Hunter's Moon Hunt

6:00pm - 7:00pm
Teen, Adult
Union Mills Branch
Library Branch: Union Mills Branch
Room: UM-Meeting Room
Age Group: Teen, Adult
Program Description: Local Interests
Event Details:

Come, creatures of the night, and bring a flashlight. Start with a hint of horror with a story at the Library. Then, creep after clues through the cemetery under the Hunter’s Moon.

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

Fabrication Open Lab

6:00pm - 7:30pm
Teen, Adult
LPCPL Exchange
Library Branch: LPCPL Exchange
Room: EX-Classroom
Age Group: Teen, Adult
Program Description: Maker
Event Details:

Whether you are new to working with your hands or a pro woodworker or machinist, join us on the third Monday of each month!

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.