Upcoming Events

Age Group
Age Group
Program Type
Library Branch
Registration Type

Primary tabs

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Adult" group.

Page Turners

12:00pm - 1:00pm
Adult
Main Library
Library Branch: Main Library
Room: MN-Meeting Room B
Age Group: Adult
Program Description: Book Discussion
Event Details:

Please join us for a lively discussion of this month's selection. Newcomers are always welcome!

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Sewing Open Lab

6:00pm - 7:30pm
Teen, Adult
LPCPL Exchange
Library Branch: LPCPL Exchange
Room: EX-Classroom
Age Group: Teen, Adult
Program Description: Maker
Event Details:

Let's sew! Gather on the second Tuesdays of the month for an evening of sewing, friends, and skill sharing. Bring a project that you're currently working on or start a new one with us!

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Adult" group.

Dining with Diabetes: Reunion

4:30pm - 6:30pm
Adult
Union Mills Branch
Open
Registration
Library Branch: Union Mills Branch
Room: UM-Meeting Room
Age Group: Adult
Program Description: Presentation
Registration Required
Seats Remaining: 3
Event Details:

Dining with Diabetes (DWD) is a fun and interactive diabetes self-management educational program open to all, and of particular interest to individuals with prediabetes or type 1 or type 2 diabetes and members of their support system.

Disclaimer(s)

Food Allergies

We cannot guarantee that food served at this program has not come into contact with tree nuts, soy, or other allergens.

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Adult" group.
Virtual Event
Library Branch: Online
Age Group: Adult
Program Description: Book Discussion
Event Details:

Join us for an evening with New York Times bestselling author Silvia Moreno-Garcia!

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Adult" group.

Hooked on Books

2:00pm - 3:00pm
Adult
Fish Lake Branch
Library Branch: Fish Lake Branch
Room: FL-Meeting Room
Age Group: Adult
Program Description: Book Discussion
Event Details:

Please join us for a lively discussion of this month's selection. Newcomers are always welcome!

This event is in the "Adult" group.

Stretch & Refresh Yoga

5:00pm - 6:00pm
Adult
Coolspring Branch
Open
Registration
Library Branch: Coolspring Branch
Room: CS-Meeting Room
Age Group: Adult
Program Description: Health and Wellness
Registration Required
Seats Remaining: 17
Event Details:

Yoga is a great way to improve your balance, flexibility, and strength. Whether you’re an experienced yogi or are interested in picking up a new hobby, come stretch and refresh your body and mind with all-levels yoga.

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Adult" group.

Technology One-on-One

3:00pm - 4:00pm
Adult
Main Library
Open
Registration
Library Branch: Main Library
Room: MN-Study Room A
Age Group: Adult
Program Description: Technology
Registration Required
Seats Remaining: 1
Event Details:

Do you need help with your cell phone, tablet, or laptop? Book a one-hour session with a member of our Tech Team for help with your specific needs. Please bring your device, charger, and your list of questions.

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Adult" group.

Book to Movie Night

5:00pm - 7:00pm
Adult
Main Library
Library Branch: Main Library
Room: MN-Meeting Room B
Age Group: Adult
Program Description: Special Event
Event Details:

Come to the Library for popcorn and a viewing of Mur

Disclaimer(s)

Food Allergies

We cannot guarantee that food served at this program has not come into contact with tree nuts, soy, or other allergens.

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Adult" group.

Talk & Stitch

5:30pm - 7:30pm
Adult
LPCPL Exchange
Library Branch: LPCPL Exchange
Age Group: Adult
Program Description: Maker
Event Details:

Interested in knitting, crochet, hand-sewing, or other needlework projects? Whether you're just learning or have decades of experience, join fellow fiber craft enthusiasts for an evening of stitching!

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

6:00pm - 7:00pm
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

10:30am - 11:30am
Teen, Adult
LPCPL Exchange
At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.