Event List

Age Group
Age Group
Program Type
Library Branch
Registration Type

Primary tabs

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Thursday, December 5, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Thursday, December 5, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

3D Printing Open Lab

Thursday, December 5, 2024 at 6:00pm - 7:30pm
EX-Classroom at LPCPL Exchange
Program Description:
Maker
Age Group:
Teen, Adult
Event Details:

Want to learn more about 3D printing? Join us on the first Thursday of each month to create 3D models, prototype, and skill share. An instructor will be present to assist with e...

Library Branch: LPCPL Exchange
Room: EX-Classroom
Age Group: Teen, Adult
Program Description: Maker
Event Details:

Want to learn more about 3D printing? Join us on the first Thursday of each month to create 3D models, prototype, and skill share.

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Friday, December 6, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Saturday, December 7, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Monday, December 9, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Monday, December 9, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Tuesday, December 10, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Tuesday, December 10, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Sewing Open Lab

Tuesday, December 10, 2024 at 6:00pm - 7:30pm
EX-Classroom at LPCPL Exchange
Program Description:
Maker
Age Group:
Teen, Adult
Event Details:

Let's sew! Gather on the second Tuesdays of the month for an evening of sewing, friends, and skill sharing. Bring a project that you're currently working on or start a new one with...

Library Branch: LPCPL Exchange
Room: EX-Classroom
Age Group: Teen, Adult
Program Description: Maker
Event Details:

Let's sew! Gather on the second Tuesdays of the month for an evening of sewing, friends, and skill sharing. Bring a project that you're currently working on or start a new one with us!

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Wednesday, December 11, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Wednesday, December 11, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Thursday, December 12, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Friday, December 13, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Saturday, December 14, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "6-11" group.
This event is in the "Teen" group.

Cooking with Kids - No Bake Cookies

Saturday, December 14, 2024 at 12:00pm - 1:00pm
MN-Multipurpose Room at Main Library
Program Description:
Special Event
Age Group:
6-11, Teen
Event Details:

We will learn basic cooking skills, promote healthy eating habits, and enjoy some yummy food together! Join us for a cookie making demonstration using the Charlie Cart! Particip...

Library Branch: Main Library
Room: MN-Multipurpose Room
Age Group: 6-11, Teen
Program Description: Special Event
Event Details:

We will learn basic cooking skills, promote healthy eating habits, and enjoy some yummy food together!

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Monday, December 16, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Monday, December 16, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Tuesday, December 17, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

At Capacity
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 0

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Tuesday, December 17, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Wednesday, December 18, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Wednesday, December 18, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Open
Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Thursday, December 19, 2024 at 10:30am - 11:30am
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.
 

This event is in the "Teen" group.
This event is in the "Adult" group.

Start It! Equipment Training

Thursday, December 19, 2024 at 6:00pm - 7:00pm
LPCPL Exchange
Program Description:
Equipment Training
Age Group:
Teen, Adult
Exchange_Start It! Equipment Training:

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to l...

Registration
Library Branch: LPCPL Exchange
Age Group: Teen, Adult
Program Description: Equipment Training
Registration Required
Seats Remaining: 1

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

When learning a new skill, it is best to build upon our knowledge step-by-step. To best support a strong foundation of knowledge on the Makerspace equipment, we require the following:

  • General sewing machine training before Heavy Duty sewing machine
  • Sindoh, UltiMaker, or Bambu 3D Printer training before Resin 3D Printer
  • X-Carve CNC Machine training before Roland CNC Mill
  • Wood lathe training before Precision Mini Lathe

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website

Disclaimer(s)

Exchange Safety

During this class, you will work with machinery and a variety of tools. Closed toe shoes are required. Avoid wearing baggy clothing or dangling jewelry, and tie back long hair.